Spring tech micro elite

[adk1]

I purchased one used last spring. It came filled with glycol. I have yet to start the ro up. Can anyone tell me what procedure to use to remove the glycol and get the machine up and running?

[Haynes Forest Products]

Congratulations ADK finally got a RO Now dang it man why didn't you get the instructions? I just have to laugh at all the equipment made without instructions.

[adk1]

I got the instructions but it doesn't say anything about a specific process at startup when it is filled with glycol

[wiam]

My first ro was used. Had glycol/preservative in it. I rinsed with rated capacity of soft water as the dealer told me. First 2-15 gallon drums I made that year were nasty. Since then I always do a short rinse then a wash cycle then rinse with rated capacity with spring water. Not saying this is right, but it works for me.

[mellondome]

Wait... you didnt already have this planned out and researched for 3 years in advance?

Make sure you rinse with at least the rated amount if water (100 gal for 100 gph machine). And do a wash followed by another rinse.

[WESTVIRGINIAMAPLER]

Do a Rinse and a soap wash and then a rinse.