Wes fab syrup hose size

[devils11217]

What size hose should I buy for my Wes fan press. I am out and about and not near my press

[adk1]

An I could go measure but will need to wait till tomorrow

[Haynes Forest Products]

I have everything plumbed using 1/2 cam locks and they are 1/2. If its a new press you need to decide how you will attach your hoses. the plumbing is threaded 1/2 NPT. You want as full flow as possible so dont reduce it down. I also use step saver clear poly hose it will not kink and will take the heat. Farm and Fleet carries the thick wall poly.

[MISugarDaddy]

3/4" hose will slide over the 1/2" pipe and then clamp it if you are looking for an inexpensive means to set up your press.
Gary

[WESTVIRGINIAMAPLER]

5/8 hose with 1/4" wall thickness rated for high temps.