Tan releaser guy

[madmapler]

Can anyone give me the contact info for the guy in NY who builds the tan releasers? Anyone using his equipment? Thanks.

[jimsudz]

Ed soeble is his name. From north of Syracuse off rt 81. He has some releaser for sale on Sugarbush info.

[Maplewalnut]

Great guy but be warned they don't work well under anything other than high vac. Dairy pumps and the like are not compatible unless he modified his design.

[MT Pockets Producer]

We have no personal experience with these releasers but there is a producer near us that has two Sobles running on old dairy pumps and he seemed very satisfied so there may have been some modifications done.

[Thompson's Tree Farm]

I have several of Ed's releasers. Work well and he has been great support. He is going to have a booth at Verona I believe. 315-409-6608 315-668-6469

[Moser's Maple]

owner of 3 of them. have had minor problems, but ed always there to work through the problems or come up with the need part for the fix. Actually his new electric line is based off my electric releaser design, which I borrowed from Tmeeh with just a few upgrades :mrgreen:

[Moser's Maple]

Great guy but be warned they don't work well under anything other than high vac. Dairy pumps and the like are not compatible unless he modified his design.
sounds like you have the drop down rods were not connected to the swivel arm, or an old style float. give Ed a call, and I bet he'll help you out

[Maplewalnut]

sounds like you have the drop down rods were not connected to the swivel arm, or an old style float. give Ed a call, and I bet he'll help you out

Ed made it right and is honest to deal with. Sounds like his design may have changed to work with lower vac

[madmapler]

Thanks for the replies. I'm running about 24" at this bush but it may be a little better this year.

[maple flats]

I have 1 of his double horizontal releasers. It works fine on mine, that pump has run anywhere from 18-24", the releaser performs good in that whole range. Great guy to deal with. He is at Verona, has a full display around the corner from the check in tables.