johnpma
01-05-2017, 08:45 AM
Finally had some time between the holidays to play around with a tubing tool build
Picked up a pair of fencing pliers at TSC and a set of vice grips both on clearance With some simple modifications and a bit of creativity I was able to come up with a tool for my 5/16" spouts, T's ect
Seems to work pretty darn good
Picked up a pair of fencing pliers at TSC and a set of vice grips both on clearance With some simple modifications and a bit of creativity I was able to come up with a tool for my 5/16" spouts, T's ect
Seems to work pretty darn good