PDA

View Full Version : September Journal



DrTimPerkins
09-02-2016, 08:08 AM
Kinda slow here...

Worked at the Champlain Valley Fair the past few days in the Chittenden County Maple Sugar Makers sugarhouse at the fair. UVM PMRC organizes and operates the education area. Got my fill of maple cream covered donuts.

PerryFamily
09-02-2016, 06:16 PM
Finished putting roads in a new bush that was thinned early this summer. Hopefully should have 5-600 there

New press is in just need to go pickup. Went from a short stack 10" to a full stack 10" with the air diaphragm pump. Should suit me for a while

Still splitting wood......

maple maniac65
09-02-2016, 07:42 PM
Building a retaining wall using 65 1000 lb blocks 2x2x2 fifty feet long. Quite the workout for a 3032e jd tractor

Maple Man 85
09-04-2016, 12:04 PM
Finished cutting up the trees that fell through out the summer in the bush, and attending a forestry festival 9/10.

Maple Man 85

maplecherry
09-12-2016, 07:51 PM
Working on new this years project - Hoping to have things wrapped up before too long.14501

Wanabe1972
09-12-2016, 09:46 PM
Santa just came early and dropped off my new Smokylake pan set it sure is pretty. I'm still working on the revamp to the sugar house. The main control panel I built for the shack is done. It has autodraw, stack temp, blower controls AOF AUF, sap level, high temp, and low head tank level. Still have plenty to do.

WestfordSugarworks
09-13-2016, 01:03 AM
Finishing up installing 400 or so new taps, new RO is plumbed in, putting in new tank this weekend. Going to Pennsylvania to sell syrup at an Organic Festival on Saturday. Need to fix up a few spots in the woods but compared to last year, we have a hell of a lot less work ahead of us before the sap flows. :)

Bruce L
09-14-2016, 12:06 PM
Hope to finish putting up the new 60 X 60 Quonset building this month,then hook up to some new main lines put up earlier this year,run a new mainline through a hill I had excavated,get ready for the steam away coming,move a building over the tank at the remote bush to set up the releaser and vacuum pump......................

DucFight
09-26-2016, 07:42 PM
Did a little ground work for a concrete pad, got that poured, new tank was delivered and now making a building around that. 14563145621456514564