Pictures of a Atlas Copco pump setup

[murferd]

Anybody got pictures of their pump setup that they would share? I got a new GV-40, but it came without a book, all I can find online is a diagram showing inlet & discharge.
The dealer I bought it from was just into air compressors & just got bought out by Atlas Copco so vacuum is new to him, so he no help.

[madmapler]

You may not find a book for that. The one I bought came with a cd only.

[Flat Lander Sugaring]

i have some PM me your cel# l and I will send them

[murferd]

Thanks. What size do you guys have on how many taps & how have they performed?

[PerryFamily]

13536

Hope this helps

[murferd]

Great thanks a lot! That's basically how I did it. Was getting approximately 27 in hg with a small leak in abs pipe where vacuum guage is.

[PerryFamily]

Sorry about the sideways picture
If you PM me maybe I can get it the correct way
The 1/2" inlet threw me off but it works awesome

This is a GV25, 1.2hp 17 cfm
I run this 24/7 and 26.5-27"
It's in a 14' insulated truck body
Zero ice in the releaser, I actually have to keep the door open a couple inches because that little pump keeps it so warm.

I love the pump
It's on 500 taps, 1000' of 1" and 1200' of 3/4" and I consistently get 2 gallons per tap on decent runs

[Flat Lander Sugaring]

found picture on my computer

13579 GV25, its awesome, definitely use 100% synthetic oil, NO 50/50 mix or additive