View Full Version : 5/16 quick connect
Clinkis
02-21-2016, 07:11 PM
I saw in another post that apparently there are Quick connects that you can get for 5/16 tubing. Anyone know who makes them and where I might be able to order them from?
VT_K9
02-21-2016, 07:13 PM
I bought a few through Bascoms a few years back thinking they would be a great idea for trail access. They seem to be pretty restrictive and may wear out with frequent use. Probably still worth you taking a look to see if they work for you.
Mike
Clinkis
02-21-2016, 07:50 PM
Thanks, I have A new bush I'm tapping this year and owner doesn't want laterials left up so want to put them between end hooks and saddles so I can take them down without cutting tubing.
DrTimPerkins
02-22-2016, 08:21 AM
We use quick disconnects a fair bit for our research studies. They'll hold vacuum well enough, but you don't want to pull the lines real tight between them unless you have tension relief or you can cause leaks.
I have 2 on lines that cross my road out to my back woods where I have another tank. They work good and believe they are IPL brand.
jetdoc
02-22-2016, 09:38 AM
Leader sells them for $.90 ea I think. We are starting to use them on our drops to remove every year for cleaning.
Clinkis
02-22-2016, 08:19 PM
Thanks everyone, found them at my local supplier for a $1 a piece today. Like I said, plan on putting them between saddle and end hook so shouldnt be under any tension.
Powered by vBulletin® Version 4.1.7 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.