3/16 pressure gauge question

[M.MacKenzie]

What is the best way to attach a pressure gauge (1/4) to the end of a 3/16 tubing line (in terms of fittings)? Thanks.

[Mini_Maple_Men]

I used a 1/4 female air chuck fitting from Home Depot that was $1.58, Teflon tapped the gauge threads tightened it up, then I dunked the end of my linein hot water in my thermos and pushed it in, snob fit and no leaks. Have 25 lbs of vac on the line. If I could of found 3/16 pipe barb to 1/4 female I would of pre feed that though!

[eustis22]

$1.55

http://hosewarehouse.com/BF152-Dixon-Brass-Barbed-Solid-Female-Insert-3-16-Hose-ID-1-4-NPTF-Thread?gclid=CjwKEAiAova1BRDS15OXjcug_FMSJACWNAKZ8 KyqNhjmECaQqMqJD3yaQsQkX9sTgTvpTYnLmQqFFxoCJC_w_wc B