how to connect thermostat on a shurflo pump ?

[Jpd1]

I have bought a chiness thermostat with a chiness manuel. Now i can't connect de wire.

Anybody can help me ?

1190811908

[Jpd1]

The NTC is for my temperature sensor also connected

[RIVERWINDS]

The NTC is for my temperature sensor also connected

Just do as the instructions show. RED is hot and BLACK is ground. You'll need a 12v feeder to the IN side, then a jumper wire to the OUT side. The RED coming out of the OUT side goes to the RED pump wire that comes from the pressure switch. Ground the pump and ground the IN side and you're good to go. Don't forget an inline fuse somewhere after the battery before the controller.

[Jpd1]

Thank's you, my pump with the thermostats run good !!!