Spigot for finishing pan

[danno]

Anybody have a recommendation or a link for a spigot to install on my finishing pan?

I found a good SS pan at the scratch and dent section of my local restaurant supply store and built the rack using ss bolts through the pan supporting a filter rack, but am having problems finding a spigot.

I wanted to find one that is "weldless". Basically a male end that goes through the wall of the pan with a nut to fasten tight.

[Jim Brown]

danno; your local hardware store should have something you can use. We bought a 3/4 brass 1/4 turn on-off from the hadware for around $5.00 it works great just tell them what you are trying to do and if the hardware is worth it's salt they should be able to help you.
Jim