Jal-Bear
03-11-2015, 09:27 PM
This will be my first year boiling on a Lapierre 2x5 Junior. Last year I boiled on a 18"x48" continuous flow flat pan with a pre-heater with around 100 taps and had a blast! I increased my tap count by a little more than double and purchased the 2x5 this past summer. Did a test boil with water today, quite the difference compared to the flat pan! If anyone has any advice or tips on operating this rig I'd love to hear it. I was running around 2 inches above the flues and about 2-1/2 inches in the syrup pan. Just wondering if that is the proper depth I should be running it while getting used to it. Thanks.