PDA

View Full Version : problem with boiling



gmack
03-08-2015, 04:44 PM
I have a new cdl supper hobby evaporator , I have a good boil using water in the rear raised flue pan but just a very light boil in the front pan. I s this normal ? How hard should it boil in the front pan where you draw off ?

Thank you

WI Sugarpop
03-08-2015, 05:19 PM
When you have close to syrup in the front pan instead of water it should boil just fine. Syrup will boil easier than water.

gmack
03-08-2015, 06:05 PM
When you have close to syrup in the front pan instead of water it should boil just fine. Syrup will boil easier than water.


Ok Thank you
I was hoping that was the case.

Tapping saturday.
150 taps

PerryW
03-08-2015, 06:11 PM
There are a couple other reasons:

- If you throw the wood in too far, you won't get as much heat under the front part of the evaporator.
- Overall boiling improves after an hour of so when all the bricks get heated up and you get a good bed of coals under the fire