Sap Ladder

[Tappy Sap Master]

I have a 5/16 sap ladder within 15 ft of my releaser. I changed the system abit this year now my ladder is to short, as my line slopes away from the releaser now. Should i just extend the 5/16 risers, Or try to make two separate lifts. My ladder is about 10' tall, i need to extend it another 2-3 ft so its slopes to my relaser.

[BreezyHill]

I would just extend the risers to accommodate the change in height.

My tallest is 18' and it is the third in a 7 ladder series.

Closest is 50' from the releaser furthest now is 2200' from the releaser and is 5th after a y after #3 in the 7 series.

You likely will not notice any different than 10' as long as you are running atleast 17-18" of vac.

Ben