View Full Version : Cupola "windows"
Birddog
08-26-2014, 10:08 PM
I'm thinking I would like windows in my cupola doors. I'm thinking I might try building them with 2x2 cedar. Cut a groove in the middle and frame around some acrylic cut to fit. Has anyone tried anything like this? Any suggestions would be appreciated.http://img.tapatalk.com/d/14/08/27/ymana8y2.jpg
SeanD
08-26-2014, 10:37 PM
I've thought about this a few times - especially when I see someone throwing out some old sashes after a remodel. You know the half-sized ones that would go over a kitchen sink or in a bathroom? Those would probably look nice. It would just be for looks and a little more light when it's closed up.
MISugarDaddy
08-27-2014, 06:24 AM
Last year or the year before someone posted pictures of their completed sugarhouse and they had put windows in their cupola. They used regular wood framed windows and put an eye bolt in either side, just off center, so that it would naturally swing closed when they released the rope they had hooked to it. It looked like a nice idea, but I would be concerned about having glass over my evaporator.
Birddog
09-07-2014, 09:22 PM
http://tapatalk.imageshack.com/v2/14/09/07/d4aa628c78b0fd875eea1f754335e5f0.jpg This is how they came out. I used cedar 2x2s for the window frame and cut grooves to fit the acrylic. I then sealed it in with silicone. It seemed to work out ok
SeanD
09-08-2014, 09:43 PM
Very nice. Is that pre-primed composite or did you get up there and paint?
Sean
Birddog
09-08-2014, 10:49 PM
Thank you - I cut and fitted the pieces and then primed and painted before nailing it up - then went back and touched up after nailing. Nothing is perfect but I'm having fun building it.
Sent from my iPhone using Tapatalk
Birddog
09-21-2014, 09:52 PM
http://tapatalk.imageshack.com/v2/14/09/21/53270c0bae898ab4f72d54e9c0ba3e40.jpg latest progess
Sent from my iPhone using Tapatalk
lpakiz
09-22-2014, 09:13 AM
Looks very nice, there, Bird dog. Just steps in front of the door, or a full deck?
MISugarDaddy
09-22-2014, 09:20 AM
You did a really nice job!!!
Birddog
09-22-2014, 12:15 PM
Thank you both - I haven't decided for sure what I'm going to do in front of the door. I might put in a small landing step with flagstone around it.
Sent from my iPhone using Tapatalk
Machinist67
09-22-2014, 12:20 PM
After seeing your project, it make me want to change mine up a little. Great looking building. Nice place to hang when you are in the "Doghouse"
Birddog
09-22-2014, 01:29 PM
After seeing your project, it make me want to change mine up a little. Great looking building. Nice place to hang when you are in the "Doghouse" Thank you. I had the benefit of seeing what others have done from posts on this site. It's funny that you mention that, my son came home from college a while ago and said I should turn it into a "man-cave." I still have soffits, corner trim and then my smoke stack and some other odds and ends to get done but it's really starting to come together.
Birddog
10-24-2014, 11:01 PM
http://tapatalk.imageshack.com/v2/14/10/24/ee5cee069c9f6b7859f284a3ef2e1d57.jpg Got the evaporator rolled in. Time to decide how to run the chimney pipe. I think I'll go straight out the back and then up.
Sent from my iPhone using Tapatalk
Birddog
10-24-2014, 11:03 PM
http://tapatalk.imageshack.com/v2/14/10/24/3a5d4e632eec61253aefecf26b195413.jpg my little Mason 2x3 is finally home!
Sent from my iPhone using Tapatalk
flhr10
12-02-2014, 12:25 PM
Made my frames out of treated 2x4 ripped down to 2x2. Attached clear skylight material and used 1/2" ridgid copper for the pivot. Attached the pivot with clamps and fastened a arm and rope and pulleys. Rope runs down inside of wall and hooks to eyebolts on post. Rope has dog snap on end of it.10067
Birddog
12-04-2014, 12:44 PM
Nice design!
Sent from my iPhone using Tapatalk
Powered by vBulletin® Version 4.1.7 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.