new evaporator

[handtapper]

I purchased a brand new sunrise metals 2x6 drop flue from the maple guys. I am thrilled to be moving up from the half pint. Now I have to sell the little guy and stuff the big guy into my 12x8 shack. I'm expecting it to be a bit on the steamy side in there this spring. It was steamy doing 6to8gph this units advertised at 37 Chris said I should be over 40 with a blower. Mirror finish on the pans and stainless sides on the arch. Couldn't be any happier.

[PerryW]

awesome! you'll love the 2x6.

[lakeview maple]

Good for you , you will love the 2x6

[Birddog]

Congrats - you should post some pics when you get it.


Sent from my iPhone using Tapatalk

[maple flats]

Congratulations, great move.
To manage the steam, just make a hood and send it outside. If you do make one, be sure to have a condensate gutter around the inside and drain it to a bucket for some warm water, also have a catch pan in the hood under the stack, and drain that to the gutter.

[handtapper]

Thanks guys! I went and paid for it yesterday and took some pics I'll get them loaded up. I've been reading on here about hoods but I'm not ready to build yet. Might drive around and look at some so I get the channeling right the first time etc