LOL,,When I suck on the lines, how much vaccum ??

[TerryEspo]

I can just imagine the replies I may get from this post, but, will post in hopes of an honest answer.

When I pull a 5/16 tube from one of my 5 gallon collections buckets and suck on the tubes, I can see sap being pulled from the taps. If I don't suck, the sap is not flowing. I suck and then hold my tongue on it to hold vacuum, it kind of hurts the tongue after 10 seconds or so, lol.

So, while I am looking like a fool, bent over sucking on a line,,,,How much pressure by comparison I am pulling as to what a Shurflow pump will do? Can I suck better than a Shurflow, LOL.

I do see the benefits of a pump, just have to wait for next year.

I can only imagine the replies this post may cause, lol.

Serious question though.

Thanks.

[Bruce L]

Hi Terry, when our past vacuum pump was only reading 5" of vacuum, I proved to my Father that wasn't worthwhile as I could suck on the vacuum guage and only get 5", so not much going on way out in the line with the friction loss of the tubing, length etc.

[lpakiz]

Terry, if you can get your hands (mouth) on a vacuum gauge, you will get a hard number. I'm pretty sure a person can't blow even one pound of pressure, but it seems that I can remember getting the needle to move on a vacuum gauge.

[psparr]

Boy the conversations when the taps are pulled!

[Rossell's Sugar Camp]

I have pulled down a vacuum guage down to 29 inches before by mouth. Its crazy but most people can do this in fact.

[PerryW]

One year I hired a guy to suck sap out of my trees but it turns out he was drinking most of the sap so I had to fire him.

[3GoatHill]

The front tire on my tractor is about 12 lbs low, my air compressor is broke, can you blow it up for me? :lol: