Wanabe1972
03-18-2014, 02:02 PM
Finally got to flush my homemade RO today and after fixing about a dozen leaks I let it run on well water for a couple of hours. After I flushed it I was dying to know if it works. I mixed up 5 gallons of 2% water and set the needle valve on the concentrate to .4 gpm. Ran all of it through and went to 5 % on a single pass. My homemade sap was 45 degrees so the numbers are a little off but at least it works. The farm where my taps are called and said the pump came on and the releaser was dumping so maybe we can run the real deal soon. Good luck to all as it might be time.