BRASS FITTING GASKETS

[the old guy]

ON OUR USED D&G, WHILE GIVING BOTH THE SYRUP PAN AND THE FLUE PAN A THOROUGH CLEANING, WE HAVE FOUND THAT SEVRAL OF THE FITTING GASKETS NEED TO BE REPLACED. ALL THE FITTINGS ARE 1 1/4". WHAT KINDS OF GASKETS CAN I USE? ANY IDEAS??

THE OLD GUY

[Fred Henderson]

Teflon would be good.

[brookledge]

Why don't you call the nearest D&G dealer and have them send some in the mail. Or at least get a price from them before you try to make your own.
Keith

[royalmaple]

Old guy, I'll take a look. I may have an extra set. I'll let you know if I find them.

You can have them if I find them.

[the old guy]

ROYAL MAPLE

I HAVE GOT A FEW JARS OF LAST SPRING'S SYRUP. I'LL JUST TRADE YOU FOR THE GASKETS IF YOU STILL HAVE THEM. I AM HAVING A HARD TIME GETTING IN CONTACT WITH DOMINION GRIMM DEALERS RIGHT NOW. THEY MUST STILL HAVE SHORTENED HOURS. BUT THANKS ANYWAY FOR THINKING OF ME.

THE OLD GUY

[royalmaple]

old guy,

I found them :!:

Send me your phone number and I'll give you a buzz if you are available to make sure they will work, and consider them yours.

[the old guy]

ROYAL MAPLE

I AM A RETIRED SCHOOL TEACHER AND HAVE BEEN HELPING THE SCHOOL BY DOING A LITTLE SUBSTITUTE TEACHING FOR THEM. SO I HAVE BEEN AWAY FROM HOME FOR A LITTLE WHILE.

MY PH# IS 1-812-536-2659. THE D7G IS A MODEL RV700 2 X 6 1996, THE FITTINGS ARE 1 1/4 INSIDE DIAMETER. THERE IS ONE FITTING I CAN'T GET LOOSE. THE GASKET IS MISSING AND THERE IS NO GOOD WAY TO HOLD THE FITTING TO GET IT APART. I GUESS I WILL TAKE IT TO A MACHINE SHOP TO SEE IF THEY CAN DO IT.

THE OLD GUY