Would this pump work?

[Starting Small]

This vacuum pump was given to me today, do you guys think it would work? I would only have this on 150-200 taps? I am not sure and cannot seem to find the cfms. The guy that gave it to me didnt know either. Any thoughts? Thanks,
-Dave792179227923

Also, I know it does not mean much without the cfm's but it showed 22 inches of vac on the guage when the guy showed it to me.

[TheMapleMoose]

http://www.gastmfg.com/product_detail.aspx?ProductID=115&ProductTypeID=20
If this is your girl here are her specs.
That exact model # isn't there but the two 1/6hp are pretty close to being the same it appears. Looks like around 1cfm open air

[500592]

May be a little on the small side but if that's the best you can get then by all means use some vac is better than no vac. With only 200 taps it doesn't make a lot of sense to spend a couple 1000 dollars on a pump. IMHO

[Starting Small]

That was what I was afraid of, oh well what can I expect for free! I appreciate your help!
-Dave