Lapierre Extractor

[western mainer]

The releaser has 3 inlets can I add more inlet hole or can I just tee off the holes it has?
Thanks Brian

[Dave Y]

I dont know what model you have , but you should have know problem adding an other hole. just be sure it is round and threaded straight.

[delivron]

I would suggest you sent the Manifold only to Swanton VT to have the hole drilled and tapped. Unless you have the proper tools you risk damage.
Contact Eric for a price. I am relatively confident he can do that for you.

[Maple Ridge Farm]

Lapierre will drill a new hole on the extractor but so will any good machine shop.

[spud]

The releaser has 3 inlets can I add more inlet hole or can I just tee off the holes it has?
Thanks Brian

Don't tee off from the holes. I tap all my own holes and it just takes a minute to do it. I bought my tap kit from Northern tools and it cost less then $50.00. Very simple to do and it will save you a bunch of money.

Spud

[western mainer]

Thanks for the info.
Brian

[Tmeeeh]

I built an extractor last year. no drilling and tapping. Just a hole saw and uni seals. It takes a good hard push to shove the pvc through but .. no leaks. See this video http://www.youtube.com/watch?v=LxmWkmdBkwM Find uni seals here http://www.aussieglobe.com/uniseal1.htm