Help... Can you ID this arch that I bought today

[killingworthmaple]

Hello hope everyone is having a great spring. I just picked up this arch today and am wondering if anyone out there knows anything about it. I was told is was custom made in Vermont. It is a 2x6 raised flue with a blower and air tubes in the door and back wall also air comes up from the grate. There is no marking anywhere that I can see. Any help anyone can be about how to fire it would also be a great help thanks and check out the pictures. Also I need a set of good pans for it if anyone has any leads on any.

Nathan
860-604-811578707871787278737874

[heus]

Cant help you but I just wanted to say that it looks very nice.

[lpakiz]

It has all the characteristics of an INTENSOFIRE.

[jrmaple]

You might want to look into this set of pans http://mapletrader.com/traderclassifieds/showproduct.php?product=1727&title=2x6-raised-flue-2c-cross-flow-evaporator&cat=3 , maybe he will separate them from the arch. The 9" flues will give you a much better evaporation rate with that arch. Also Mason evaporators used to make raised flue pans for a 2x6, their prices are reasonable, same thing with Sunrise Metal Shop.

[killingworthmaple]

thanks for the tips I will check them out.

Nathan

[collinsmapleman2012]

it definitely has the characteristics of a CDL arch, so maybe an intensofire or just a generic wood fired arch.

[cpmaple]

To be honest with u I think that is homemade, I use to have a 5x10 that was almost the same set up and was told it was made from a gentleman in the Bristol vt area. Then the following year I went to Lincoln vt to get a few holding tanks and when I got there I got a tour of the gentlmans sugarhouse and hes set was the same as mine once we got talking he told me the same that a gentleman in Bristol vt area built the arch. His arch is identical to yours. Just my two cents maybe , maybe not

[OldManMaple]

Looks like 802 maple may have had a hand in it. If not he would know who made it.