View Full Version : ro vs. steamaway
maplefarmer
04-24-2013, 04:50 PM
I have a 2x6 evap. wanting to up my production, staying with my 2x6, would it be better to go with an ro, or steamaway, preheater ? any diff. in syrup quality or boiling time,cost or effientcy, any other objectives I am not seeing ?
Thompson's Tree Farm
04-24-2013, 05:07 PM
RO wins hands down!
jrgagne99
04-24-2013, 05:25 PM
RO will save you more time, but the hot water supply from a steam-away is nice. Add more taps and do both! :)
Dollar for dollar I think you go further with an RO
tuckermtn
04-24-2013, 07:21 PM
Do a search through the archives. this has been discussed sever times in previous threads. Lots of sage advice in the archives.
Paul VT
04-24-2013, 07:49 PM
RO. Alot easier to clean.
maple flats
04-24-2013, 07:56 PM
With an RO you get typically 4x the sap processed every hour (2% to 8% concentrate), and you can even go higher. I often go to 10 and sometimes 12% concentrate by recirculating the concentrate. A steam away at best gets 75% increase. You get far more bang for your buck with an RO.
My 2x6 will evaporate about 1 gallon/minute. When recirculating my RO with 4-4" membranes will remove 4 gallons/minute. Steamaway will remove about75% of your rig. And boiling 12% is fun
Homestead Maple
04-24-2013, 08:46 PM
Dollar for dollar I think you go further with an RO
Absolutely!!
Powered by vBulletin® Version 4.1.7 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.