Looking for: pictures of spring on BHR 216 Releaser

[cray54]

The spring that holds the small wheel is missing on our BHR 216 releaser. Can someone with this releaser post or send a picture of it? Here is where it goes:

7102

Thanks!
Chris

[Brian]

I hope this helps.

[wdchuck]

I had the same spring break last year-limped through the last few days of the season with a rubber band for tension. As a replacement, I went to Home Despot and bought a trim ring for a recessed ceiling light and used one of the springs that clips it onto the fixture- 2 springs, $11, cheaper than an order from Bernard, and a lot quicker.

[cray54]

Awesome! Both very helpful replies. I'll repair it in the morning..

[Moshers Maples]

I had mine break last year as well. Bascoms has them, I bought an extra. I think they were $3.50 each

[cray54]

Just as a followup:

I was able to do a quick repair roughly matching the provided pictures. It worked well enough.

When I placed my next Bascom order, I got a replacement for $3.50 using part number "VRWIR". That worked slightly better.

Thanks again for the help.
-Chris