stainless "U" shaped pipe for filter press

[tuckermtn]

Seems like there might be a simple way to do it, but I am looking to get another stainless "U" shaped fitting for the end of the discharge hose on my filter press. Anyone know a source or a simple stainless alternative to keep the hose pumping in to the barrel, canner, etc.

thanks-

[maple flats]

Order a replacement from the manufacturer of your (or likely any) filter press.

[maple maniac65]

i made one from 1/2 copper tubing. I bent it up on a tubing bender for conduit. I also use a piece of copper tubing attached to suction side of hose on filter press to put down a barrel when I pump them out. I do not tip them up on a barrel dolly to empty them.