Roof Jack

[derekp]

I've been looking everywhere for some reference pictures of putting my stack through my roof....my plan is to go with a garbage can and i can only find one or 2 pictures of this...what are you guys using on top of ur roof?any photos showing what you did would help...

[NH Maplemaker]

Click on my photo book. There are a few pictures of my trash can roof jack! It has been working for us since 2002 !

[newman_maple]

Are you running a single wall stack? If you are running an insulated stack, you can use a high temperature pipe flashing. I did this and have had no problems in 5 years of use.

[derekp]

I am using single walled 10" stack...

[derekp]

So i finally got my stack all tied in to the shack roof and to the 2x4....here are some pics of my take on the garage can roof jack system.666866696670

[derekp]

667366746675

[derekp]

Not sure if this is how people have been doing it but it seems like it will work good for us. Plenty of airspace around the pipe and the pipe flashing measured 27" which is exactly 4 metal roof ribs..added a bunch of lexel for a seal then put the screws to each rib, def water tight...I'll take a few better pics tomorrow. My phone camera died before i got the weather ring and last length of pipe on...

[maple marc]

10" single wall pipe. I jury-rigged it through the roof for several years, trying to run on the cheap and keep water out. Didn't work. Finally contacted Leader and they have quite a few "seconds" roof jacks. Some are simply custom units never picked up. I got a great deal on mine, and now, dry as a bone!

Marc