wet and dry line systems

[bigtreemaple]

has anyone installed a wet / dry line vacuume system, and if so is it necessary/ asvisable to run each line on a seperate wire or can they both be attached to one wire. Also, is it ok to have 5/16 laterals entering directly into the wet line or should they always enter a branch mainline?

[powerdub]

I have installed the dry line on the same wire as the wet line running it (the dry line) above the wet and tying them together with bag ties. But, I prefer to run them on seperate wires. In fact I have only one small section that I have not converted to seperate wires. I also connect the wet and dry lines every 100 feet or so with tee's. I can't prove it but I think I get more even vacuum that way.

As for running 5/16 lines right into the wet line all I have to say is go for it that is what it is there for and you will get your best vacuum from that one in my opinion. Good luck.