79Binder
01-26-2012, 06:51 AM
Hi; I am a newbie here, and I will soon go to the front page and introduce myself. But right now I have a little comething to contribute.
I beleve that I have found a cheap fix to the problem of preassure washing the inside of caged tanks and other enclosed tanks with small manways. Preassure washers, (mine at least) have a two piece wand, the lower section is thread on, 18 inches long with snap coupler for the nozzel. This section was avaiable as a replacment part at the same place I bought the preassure washer for $14.99. I bought one and took it to my local machine shop. They put a 45 degree bend in it on a 5 inch radias as close to the nozzel end as they could. With a wide fan nozzel on, I can now reach all corners of the tank.
I Hope someone finds this info useful
79Binder
I beleve that I have found a cheap fix to the problem of preassure washing the inside of caged tanks and other enclosed tanks with small manways. Preassure washers, (mine at least) have a two piece wand, the lower section is thread on, 18 inches long with snap coupler for the nozzel. This section was avaiable as a replacment part at the same place I bought the preassure washer for $14.99. I bought one and took it to my local machine shop. They put a 45 degree bend in it on a 5 inch radias as close to the nozzel end as they could. With a wide fan nozzel on, I can now reach all corners of the tank.
I Hope someone finds this info useful
79Binder