F W Webb

[gmcooper]

I stopped in at our new F W Webb store today to check on plastic pipe 3/4" and 1" 100psi in 1000' rolls. They guy could not find either size in 1000' rolls and what he did find was 400' 3/4" for $101. He kept saying Webb doesn't carry 1000' rolls. I asked about 2500' rolls as well. No luck. I was not impressed. I told him to check Williston, Vt location. He never did call back like he said. Anyone having better luck with them?

[Randy Brutkoski]

I bought 400 ft. rolls of 3/4 at webbs this past spring for $45

[maplecrest]

how far are you from st. johnsbury vt? glen goodrich has the pipe you are looking for in stock. or could work out shipping 800 639 1854

[stoweski]

500' 3/4" tubing purchased the other day from Webbs. Blue. They also had 400' of black... nothing longer though.

[gmcooper]

I checked in with F W Webb again this afternoon on the way by. Different guy on counter. He found the pipe 3/4 and 1" 100 psi in 1000' rolls. He quoted me $200.51 for the 3/4" and $289.57 for 1". Seemed higher per foot than what I have been paying and higher than i have been hearing from others. He found in stock in Williston, VT.

[spud]

I can line you up with a guy in Fairfield, Vermont who has truck loads of 1 inch 1000 foot rolls. His price is $200.00 Their really nice people to deal with.

Spud

[Thad Blaisdell]

Goodrich is cheaper than that........

[tuckermtn]

goodrich had 3/4" by 1000 ft last week for $151.00. The pipe at goodrich's seems thicker and better quality...IMHO

[gmcooper]

Goodrich's is about 3 hours from me but I might just have to make a trip up there soon.

[Flat Lander Sugaring]

goodrich had 3/4" by 1000 ft last week for $151.00. The pipe at goodrich's seems thicker and better quality...IMHO

he probably has the 160psi not the 100psi.

[maplecrest]

the pipe is 100 psi. the multi fitting fit that pipe better than charter. you have to shim the fittings with charter pipe

[Mark]

500' 3/4" tubing purchased the other day from Webbs. Blue. They also had 400' of black... nothing longer though.

You have to be careful buying blue if it is not made for maple. I checked with Cresline a while back about their blue 1" and 3/4". They told me it only had enough UV protector to protect it while it is at the supply yard and is not intended to be in the sun. That is what a tech rep told me.

[Randy Brutkoski]

Jeff, you are right about the charter with the cdl multifittings, the 1 inch ones you have to wire tie to the mainline so you dont get the vacuum leak,never had a problem with the 3/4 though. But i have noticed that super saddles work on everything with no leaks.

[lookin 2 learn]

Webb has a COD account # 148554 set up for maple sugarmakers. When you ask them for pricing using this account 3/4" x 1000' rolls are $153.33 1" x 1000' are $221.43. I just checked in there Rutland location and they have 67 rolls of the 3/4 in stock and 49 of the 1". They have transfer trucks that will bring to Windham for free.

[G.Rainville]

webbs now carries grey pipe at a very reasonable price.

[rchase]

fw webb is now a lapierre dealer too.

[Brian Ryther]

fwwebb in Utica sold me 1000' rools for $150 each today. They told me that they want to have the best price. I gave them a quote from Blake for $.152/ft and they beat that. It looks like also beat Glen by $1.

[farmall h]

[QUOTE=Brian Ryther;168932]fwwebb in Utica sold me 1000' rools for $150 each today. QUOTE]

Brian I think you meant to write 100FT roll. $150 for a 1000FT roll is a wonderful price. :o

[Brian Ryther]

not a mistake. $.15 ft

[rchase]

not a mistake. brattleboro fw webbs has it for the same price .15 per foot. brattleboro and rutland stock alot of maple supplys

[Greenwich Maple Man]

not a mistake. brattleboro fw webbs has it for the same price .15 per foot. brattleboro and rutland stock alot of maple supplys

I'm looking for 121/2 gauge wire. Do they sell that as well? Also any thoughts on a spinner?

[rchase]

they have 121/2 ga high tensile,12ga galv,9ga galv and a mountian of wire ties. they deliver to just about every where. the contact for rutland is hoss and the contact for brattleboro is rod. a spinner? im not sure i know they have unwinders for 5/16.

[gmcooper]

Tractor Supply has a decent spinning jenny for wire at a reasonable price $33.00. They also have 12 1/2 ga high tensile for $99.00 for 4000' roll.
Any prices on Webb's wire?

[farmall h]

Brian that is a good price! That must be the maple gray pipe? Guess I need to contact FW Webb here in St.Johnsbury to see if they carry it in their warehouse. Nice.

[Brian Ryther]

Black 100 psi.

[rchase]

the gray they stock in a little bit more.

[farmall h]

Brian that makes sense. $.15 per ft for 100 psi black. I generally purchase the 160 psi...thicker wall for saddle installation plus I have been using the Rapitube strapping in the place of wire on my most recent mainlines. If I recall the 160 psi 3/4" is $.12 more per foot.

[rchase]

rutland and brattleboro vermont both stock lots of 1000foot rolls.

[dadsmaplesugarshack]

Hey thats a great price is that blue or black we now have a fw webb a couple of towns over from us will have to check them out a maple supply dealer quoted a price of 320.00 for 3/4 1000' !!!!

[rchase]

thats black mainline. some for the vermont stores stock the blue but it more the that.

[dadsmaplesugarshack]

stopped at webb on my home from work today in windham they are getting me in some grey mainline comin from vermont store i trhink it was 198.00 for 1000'3/4 not bad $ i never have used grey hope its good stuff ????

[Thompson's Tree Farm]

Got 25000 feet of crestline delivered at 6 AM this morning. I paid $190 for one inch and $145 for 3/4.

[gmcooper]

Stop at Webb's this afternoon picked up 4 rolls mainline and ordered 3000' more. They finally got the maple account figured out. I think they are actually going to stock some here now.

[bees1st]

GM Cooper, where is the Webb store located down your way? We've had great weater for running lines! at least you can say that about this winter.

[Greenwich Maple Man]

I've just setup a woods using Webbs 3/4 grey. I think it works quite well. Fairly easy to work with. Will kink if you don't watch it but the price is great. I'm buying a bunch more if that tells you anything.

[gmcooper]

Bees1st
There is a new FW Webb store on 302 in Windham. From the rotary it is about 1 mile up on left heading towards North Windham. The new Tractor Supply is just before you get to Webbs. TSC is supposed to open in Feb I think.

[rchase]

i was looking at that gray pipe the other day at webbs. it seemed like really nice stuff.

[gmcooper]

Just talked to our local Webb manager this afternoon. Looks like they will be stocking all the Laperier tubing and fittings. He didn't know what all the fittings were but knew they were stocking them from now on.

[gmcooper]

I stopped in F W Webb in Windham on Friday to pick up tubing I ordered and they are now stocking a good selection of tubing supplies and they have a bunch more coming in. The manager said they will be stocking RO accessories and filters. They have a good size section of shelf space allocated and what was on the shelf already looks like more than most of the local dealers tend to have in stock.

[rchase]

I was in the keene, nh fw webb yesterday morning. They just got in all of the lapierre tubing and fittings. The manager ryan said that they are stocking all of the main line, wire, ties, fittings and 5/16 tubing, ect