Replacing grates

[Michael Greer]

Some of the grates in my arch are warped, some broken, and some missing entirely. It's a home made unit but the grates look factory made, but without a manufacturer's name plate, how would you find replacements? Are there generic grate available that could be cut to fit?

[HHM-07]

w2hat size is your rig?? i have a 2x4 leader and i made some out of 2.5 inch angle iron , they are holding up well

Dick

[PeddlerLakeSapper]

Use firebrick and drill 3) 3/4" holes in each. End of problems with warping. I used some 1/4" wire mesh under them with no sagging problems.