wet dry manifolds

[philkasza]

I was wondering how to hook a wet dry line to your releaser. Do you use another manifold or what.
thanks Philip

[mapleack]

I'd just run it into another empty port on the releaser, providing there are extra ones.

[jasonl6]

If you don't have any extra you can drill a hole with a forstner bit a little smaller than your threaded fitting. Then using the metal threaded fitting you can cut your own threads. I have done this in PVC many times. I even recently did it on 1/2" plexi.

Jason

[Maple Hobo]

How many ports does your releaser have?
How many are already used?

On our unit it has a lot of ports in the horizontal manifold so the wet and dry lines are just connected into them.
We had to put plugs in all the unused ports though.

If you don't have a manifold on your releasor you might be able to build one out of something like 4 or 6 inch plumbing PVC.
Let me know if you need some design ideas on building it?