View Full Version : Leader Stack Cover
Weekend Mapler
02-08-2011, 09:06 PM
Would somebody mind posting a picture or explanation of how to attach the leader stack cover (like the one in the picture)? I found a used one for my 7" stack but have no idea how to mount it!
Thanks!
johnallin
02-08-2011, 09:36 PM
Mcaccio,
The two straight arms get bolted to the stack - should see 1/4" holes at the ends of these. When in possition they will be horizontal, maybe an inch or so down from the top of the stack, with the cap just sitting on top of the stack.
The extended arm is for closing and openning the cap. On mine, only one cable works just fine. Pull it hard and the cap opens, give it another jerk and the cap pops back over the stack. Hope this helps and good luck.
Flat47
02-09-2011, 06:32 AM
Try searching in "Homemade Equipment." Someone made a really nice one that looks much like a Leader stack cover and shows how it's mounted on the stack.
Weekend Mapler
02-09-2011, 08:25 AM
Perfect - pictures were really helpful. Thanks.
Powered by vBulletin® Version 4.1.7 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.